DS9300 Series Scanner Support

The Setup guidelines below will take you to English documentation. You can access the localized User Guides in the MANUALS section.

 Confirm that you have the following equipment.

• DS9308 scanner 
• Zebra proprietary USB cable
• (Other host interfaces setup are described in the DS9308 Hands-Free Imager Product Reference Guide (for example,  Keyboard Wedge Interface)

First Time Connection steps

1.    Connect the RJ41 end of the USB cable to the handle of the DS9308 scanner.

2.    Connect the USB end of the cable to your computer USB port. 

3.    The DS9308 will power up with a low/medium/high beep sequence

4.    Press the DS9308 trigger or place on countertop (hands-free) and confirm a scan beam is present.

5.    Scan Return To Factory Defaults programming barcode from the DS9308 Digital Scanner Quick Start Guide.

Note: When scanning a programming barcode from a screen/monitor, increase magnification to a minimum of 125%. This will ensure good barcode quality for a successful scan.

6.    To test sending a barcode, open a text document in an application such as Microsoft Word or Notepad.

Ensure that you can type into the text document using your keyboard.

Scan a product barcode.

7.    The scanned barcode will be displayed in the text document.

Keyboard Language (Country Code) Information

If Windows is configured for a region’s local keyboard and does not use an English keyboard layout, transferred barcode data may appear inaccurate.

Identify the language Windows uses and scan a compatible keyboard language configuration barcode (country code) USB Country Keyboard Types (Country Codes)

Consult the DS9308 Imaging Scanner Product Reference Guide or available language copy) for additional scanner setup information.